噴霧干燥物料咨詢單
Spray-drying material advisory single
Customer Name and Address
（客戶名稱） ：__________________________________________
（地址） ：___________________________________________________________________________
Telephone（電話）15957324153   E-mail（郵箱）______________Telefax（ 傳真）____  
Location of Plant（廠址）______________________________________________________
1.  MATERIAL TO BE DRIED（干燥物料）
     Name（名稱）                   ____________________________________
     Chemical composition（化學成分） _______________________________________
                                      
2.  PRODUCT CAPACITY（產品處理能力）
      Output of dried product, kg per hour
     （干燥產品產量，千克 / 每小時）  
      Operating hours per year/ week/ day
     （操作時間 小時 / 每年/每周/每天）  _______________________________
3.   FEED（進料）
       Feed type (cake, emulsion, paste，
       solution, suspension, moist solids)
       進料狀態（餅狀，乳化狀，膏狀，溶液，
       懸浮液）:  __________________________________________________________
       Is material pumpable?
       此物質是否可以用泵輸送？Viscosity (粘度) 0.1~1.0 Pa•s  at (溫度) ：   。
       Is material abrasive?
       此物質是否具有磨蝕性？_______________________________
       Solids content in feed, % on total basis
       進料含固量，重量比％: _______________________________
       Maximum temperature of feed with no
       product deterioration, ℃
   可容許無損壞產品的高進料溫度℃: _______________________________
4.    END PRODUCT （后產品）
       Moisture % on total basis (method of analysis)
       余水量％（計算方法）     _______________________________________
       Max. dry product temperature, ℃
       可容許高產品溫度℃: _______________________________
       Desired mean particle size, microns
       (method of analysis)
       要求平均顆粒大小，微米（分析方法）: _______________________________
Desired particle form (agglomerate, granulate,
       powder)
       要求產品顆粒形態（附聚，顆粒，粉末）: _______________________________
       Desired bulk density, kg/m3
       要求產品堆密度，千克/每立 : _______________________________
5.    MATERIALS OF CONSTRUCTION（制造材料）
       Parts in contact with feed（與進料接觸部分）: _______________________________
       Parts in contact with dry product (與產品接觸部分)     ___________________________________
6.    HEATING（加熱）
我們準備采用天然氣加熱方式：
 Gas(Natural gas, City gas ,Water Coal gas)（天然氣，城市煤氣，水煤氣）
       Pressure at plant, bar (abs.)                   Net calorific value, kJ/Nm3
       壓力巴（絕壓） ___________________________熱值，大卡/立方米____關于加熱這一點可滿足產要求！______________ _
8.     LOCAL CONDITIONS（當地氣候條件）
         Winter （冬天）平均氣溫____5_____℃ Relative humidity（相對濕度）_
         Summer（夏天）平均氣溫 ____℃  Relative humidity（相對濕度）:  _ 
         Altitude, m above sea level海拔 (米): _________________________________
9.     ENVIRONMENTAL RESTRICTIONS（環保要求）
         Max. solids emission in exhaust air, mg/Nm3
         高廢氣含塵量，毫克/立方米            _______________________________________
         Max. noise level at given distance dBA, 1m
         大噪音限制（一米處，dBA）: _____________________________________
 
10.    PRESENT PRODUCTION（生產現狀）
          Existing drying equipment, type (目前干燥設備種類)_ ______________ _____
          Pretreatment of feed （進料預處理設備）    _______________ _______
          After treatment of dried product
          干燥后產品的后加工設備         ____________________________________
          Application of dried product干燥產品的應用     _____________________________________
11.     ASPECTS OF HEALTH AND SAFETY 健康安全方面
          Will the product processed on Niro plant be used
          for human consumption?
          經尼魯設備加工的產品是否用于人們日常消耗？                         ______________________________________
          Is it possible that the product, as particles
          suspended in air, can form an explosive or
          flammable mixture?
          該產品顆粒懸浮在空氣中是否可能爆炸或易燃？ _____________________________________
          Is the product considered hazardous, because it is  該產品是否有如下因素認為是危險品?
          Toxic （有毒）                           _____________________________________
          Carcinogenic（致癌）                  __ ____________________________________
          Mutagenic（誘變）                      ___________________________________
          Corrosive（腐蝕性）                    ______________________________________
          Irritant（刺激性）                 _ ______________________________________
          Oxidant（氧化劑）                      ____________________________________
          Unstable (reactive)不穩定性               ___________________________________
          Water reactive（與水反應）         __________________________________
          Pyrophoric（自燃性）  __________________________________
12.    MATERIAL SAFETY DATE SHEET (MSDS) 材料安全數據表
          Is customer’s sheet available? （客戶是否提供此表格）Yes 是□   No 不□
          If so please attach. （如果是的話，請附上）
   
Date （日期）_ __________________________   Name （姓名） 
 
Title （職稱）_ _____________________________       Signature （簽名）